adafruit_bmp280
- Adafruit BMP280 - Temperature & Barometic Pressure Sensor¶
CircuitPython driver from BMP280 Temperature and Barometic Pressure sensor
- Author(s): ladyada
-
class
adafruit_bmp280.
Adafruit_BMP280
[source]¶ Base BMP280 object. Use
Adafruit_BMP280_I2C
orAdafruit_BMP280_SPI
instead of this. This checks the BMP280 was found, reads the coefficients and enables the sensor for continuous reads-
altitude
¶ The altitude based on the sea level pressure (
sea_level_pressure
) - which you must enter ahead of time)
-
iir_filter
¶ Controls the time constant of the IIR filter Allowed values are set in the IIR_FILTER enum class
-
measurement_time_max
¶ Maximum time in milliseconds required to complete a measurement in normal mode
-
measurement_time_typical
¶ Typical time in milliseconds required to complete a measurement in normal mode
-
mode
¶ Operation mode Allowed values are set in the MODE enum class
-
overscan_pressure
¶ Pressure Oversampling Allowed values are set in the OVERSCAN enum class
-
overscan_temperature
¶ Temperature Oversampling Allowed values are set in the OVERSCAN enum class
-
pressure
¶ The compensated pressure in hectoPascals. returns None if pressure measurement is disabled
-
standby_period
¶ Control the inactive period when in Normal mode Allowed standby periods are set the STANDBY enum class
-
temperature
¶ The compensated temperature in degrees celsius.
-